• Ultipower 6V 12V 1A 2A 3A 4A Smart Charger 4 AGM Battery 7 stages w/ desulfator
100% Original
High Quality
Fast Shipping
6V 12V
Battery smart trickle charger
Ultipower
( Australian power plug )
NOW
BUY
Smart  Intelligent 6V 12V 
Sealed Lead Battery Charger
Can be setup in  1A, 2A, 3A 
and 4A Charging Current
with Desulfator built in

7 stages Charging
Never Over Charging (Charger can be  always connected)
Item Name:
6V / 12V 1-4A Automatic Intelligent Battery Charger
Specifications

1. Automatic Charging MCU system is applied. The whole charging process is monitored. Multi-stage  charging is automatically proceeded. Charging will automatically stops when the battery is full. You can leave the charger connected to the battery indefinitely without the risk  of overcharging; Once the battery is full, the charger monitors the battery voltage and  intermittent to float charging the battery  if the capacity of your battery lower than our charger's preset digital.

2. Compact and convenient The charger is small and light with switch mode technology, easy to carry. The switch mode technology is different from Linear  Power using in traditional  charger.  It transfers more than 85% electric  energy to battery chemical energy during charging  process, comparing with 40% of conventional charger. The  charger is suitable for all types of Sealed Lead batteries (wet, maintenance free, VRLA, AGM, etc)

3. Digital Display and More Protection Voltmeter and Ammeter will show battery's voltage and current on display screen. LED indicators will show pulse and reverse pulse charging as well as how much  charged. Polarity Protection: Prevents  the output leads from sparking due to accidental reverse connection  or short circuit, Overcharge Protection: never  worry about overcharging as charger automatically stops  when battery is full. High Temperature Protection: If  charger itself gets to high temperature, it will automatically  lower down its temperature even stop working  so that charger is well protected.

4. Maintain battery and recover it's capacity Pulse and reverse pulse charging technology is applied. The charger generates pulse and  reverse pulse to reduce battery impedance, gassing and temperature rise, restore  the sulfate into liquid to recover battery capacity. So that the charger can maintain battery and prolong its lifetime.

5.Display  Code   E5 means  battery abnormal, the voltage is either too high or too low. test- means 3 minutes tesing, H100-H001 means one hour automatic  battery maintenance  count down, during this time, the charger is maintaining the battery with a  small pulse current End means  charging is finished! E1 means  short circuit E_ means  reverse connection

6.Desulfator  built-in

 

Batteries often fail because sulfates slowly  develop and cover the battery plates. This sulfating process also  weakens the electrolyte and this combined with the gradual coating of the  plates slowly and almost imperceptibly reduces the batterys ability to  receive, store and then deliver power. This sulfating process gradually  impairs battery function and causes a capacity loss until the battery can no  longer perform the desired task and so the battery is deemed to have failed.  However using an Auto  Pulse Battery Desulfator can  reverse the process by dissolving the sulfates, cleaning the plates and  restoring the electrolyte strength so improving a batterys life and capacity  for an extended period.


Write a review

Note: HTML is not translated!
    Bad           Good

Ultipower 6V 12V 1A 2A 3A 4A Smart Charger 4 AGM Battery 7 stages w/ desulfator

  • Product Code: Charger
  • Availability: Out Of Stock
  • $59.00
  • $55.00


Tags: Ultipower_6_12V_1_4A