Your shopping cart is empty!
1. Automatic Charging MCU system is applied. The whole charging process is monitored. Multi-stage charging is automatically proceeded. Charging will automatically stops when the battery is full. You can leave the charger connected to the battery indefinitely without the risk of overcharging; Once the battery is full, the charger monitors the battery voltage and intermittent to float charging the battery if the capacity of your battery lower than our charger's preset digital.
2. Compact and convenient The charger is small and light with switch mode technology, easy to carry. The switch mode technology is different from Linear Power using in traditional charger. It transfers more than 85% electric energy to battery chemical energy during charging process, comparing with 40% of conventional charger. The charger is suitable for all types of Sealed Lead batteries (wet, maintenance free, VRLA, AGM, etc)
3. Digital Display and More Protection Voltmeter and Ammeter will show battery's voltage and current on display screen. LED indicators will show pulse and reverse pulse charging as well as how much charged. Polarity Protection: Prevents the output leads from sparking due to accidental reverse connection or short circuit, Overcharge Protection: never worry about overcharging as charger automatically stops when battery is full. High Temperature Protection: If charger itself gets to high temperature, it will automatically lower down its temperature even stop working so that charger is well protected.
4. Maintain battery and recover it's capacity Pulse and reverse pulse charging technology is applied. The charger generates pulse and reverse pulse to reduce battery impedance, gassing and temperature rise, restore the sulfate into liquid to recover battery capacity. So that the charger can maintain battery and prolong its lifetime.
5.Display Code E5 means battery abnormal, the voltage is either too high or too low. test- means 3 minutes tesing, H100-H001 means one hour automatic battery maintenance count down, during this time, the charger is maintaining the battery with a small pulse current End means charging is finished! E1 means short circuit E_ means reverse connection
Batteries often fail because sulfates slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the batterys ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have failed. However using an Auto Pulse Battery Desulfator can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a batterys life and capacity for an extended period.
0 reviews / Write a review