PowerShield PSC1000 1000VA 700W Pure Sine UPS 2x New Batteries 6M Warranty
Product Description
The PowerShield PSC1000 is a 1000VA / 700W line interactive UPS with pure sine wave output, designed to protect desktop computers, network equipment, point-of-sale systems and other sensitive electronics from blackouts, brownouts, surges and voltage fluctuations. Its wide input voltage window means it draws on battery power less often, helping to extend battery life over time.
This unit has been tested and refurbished by LANplus and is supplied with 2 brand new 12V 7Ah batteries, giving it a fresh runtime comparable to a new unit at a lower cost. A front-panel LCD displays load level, battery level, input voltage and operating mode at a glance, and the rear panel offers a mix of Australian and IEC outlets for flexible connection of your equipment.
Key Features
| Pure Sine Wave Output | Clean, stable output suitable for sensitive electronics and equipment with active PFC power supplies. |
| Wide Input Voltage Range | Tolerates -20% to +24% of nominal voltage before switching to battery, reducing unnecessary battery cycling. |
| Fast Transfer Time | 3ms transfer on blackout and 1ms on brownout for a near-seamless switch to battery power. |
| LCD Status Display | Front-panel display shows load level, battery level, input voltage and operating mode. |
| Multiple Output Sockets | 2 x Australian outlets and 2 x IEC C13 outlets for flexible connection of PCs, monitors and network gear. |
| RS232 Monitoring | Standard RS232 port, with optional RJ45/USB communication card for remote monitoring software. |
Product Specifications
| Brand | PowerShield |
| Model | PSC1000 |
| Capacity | 1000VA / 700W |
| Topology | Line Interactive |
| Output Waveform | Pure Sine Wave |
| Input Voltage Range | -20% ~ +24% of nominal |
| Frequency Range | 47–65Hz (auto-sensing) |
| Battery | 12V 7Ah SLA x2 (2 new batteries supplied) |
| Backup Time (approx.) | 14 min @ half load / 4.5 min @ full load |
| Transfer Time | 3ms (blackout) / 1ms (brownout) |
| Recharge Time | <3 hours to 90% |
| Noise Level | ≤40dBA @ 1m |
| Communication | RS232 (standard); RJ45/USB card (optional) |
| Dimensions | 380 × 200 × 180mm |
| Weight | approx. 15kg |
| Condition | Refurbished, tested |
Ideal Applications
Suitable for desktop computers, small servers, NBN/modem/router equipment, point-of-sale terminals, CCTV and security systems, and other electronics that need short-term backup power to ride out a blackout or shut down safely.
Package Includes
1 × PowerShield PSC1000 UPS (refurbished, with 2 new internal batteries)
1 × Power cord
REFURBISHED • 2 NEW BATTERIES • 6 MONTH WARRANTY
- Product Code: Commander PSC1000 UPS New Battery
- Availability: In Stock
$229.00
Product Description
The PowerShield PSC1000 is a 1000VA / 700W line interactive UPS with pure sine wave output, designed to protect desktop computers, network equipment, point-of-sale systems and other sensitive electronics from blackouts, brownouts, surges and voltage fluctuations. Its wide input voltage window means it draws on battery power less often, helping to extend battery life over time.
This unit has been tested and refurbished by LANplus and is supplied with 2 brand new 12V 7Ah batteries, giving it a fresh runtime comparable to a new unit at a lower cost. A front-panel LCD displays load level, battery level, input voltage and operating mode at a glance, and the rear panel offers a mix of Australian and IEC outlets for flexible connection of your equipment.
Key Features
| Pure Sine Wave Output | Clean, stable output suitable for sensitive electronics and equipment with active PFC power supplies. |
| Wide Input Voltage Range | Tolerates -20% to +24% of nominal voltage before switching to battery, reducing unnecessary battery cycling. |
| Fast Transfer Time | 3ms transfer on blackout and 1ms on brownout for a near-seamless switch to battery power. |
| LCD Status Display | Front-panel display shows load level, battery level, input voltage and operating mode. |
| Multiple Output Sockets | 2 x Australian outlets and 2 x IEC C13 outlets for flexible connection of PCs, monitors and network gear. |
| RS232 Monitoring | Standard RS232 port, with optional RJ45/USB communication card for remote monitoring software. |
Product Specifications
| Brand | PowerShield |
| Model | PSC1000 |
| Capacity | 1000VA / 700W |
| Topology | Line Interactive |
| Output Waveform | Pure Sine Wave |
| Input Voltage Range | -20% ~ +24% of nominal |
| Frequency Range | 47–65Hz (auto-sensing) |
| Battery | 12V 7Ah SLA x2 (2 new batteries supplied) |
| Backup Time (approx.) | 14 min @ half load / 4.5 min @ full load |
| Transfer Time | 3ms (blackout) / 1ms (brownout) |
| Recharge Time | <3 hours to 90% |
| Noise Level | ≤40dBA @ 1m |
| Communication | RS232 (standard); RJ45/USB card (optional) |
| Dimensions | 380 × 200 × 180mm |
| Weight | approx. 15kg |
| Condition | Refurbished, tested |
Ideal Applications
Suitable for desktop computers, small servers, NBN/modem/router equipment, point-of-sale terminals, CCTV and security systems, and other electronics that need short-term backup power to ride out a blackout or shut down safely.
Package Includes
1 × PowerShield PSC1000 UPS (refurbished, with 2 new internal batteries)
1 × Power cord
REFURBISHED • 2 NEW BATTERIES • 6 MONTH WARRANTY